Beckman Coulter Multisizer 4 User Manual Download Page 168

Page: 168 / 238

PN A51387A

7-8

Working with Analysis Files

Viewing Analysis Files

In the Range pane:

•

Select All to display results from the full range of the analysis.

•

Select Between Cursors to display only results between your defined cursors. For
information on setting and moving cursors, see page

7-3

•

Select From and enter specific points to limit the range without inserting cursors in a
graph.

Click

(

)

to view the interpolation.

Changing the Column Display

To wrap columns on the screen, select

Interpolation > Wrap Screen Listings

on the Run Menu bar.

To wrap columns in the printed report, select

Interpolation > Wrap Printer Listings

on the Run Menu

bar.

When you select column wrapping,

Wrap Screen Listings

and

Wrap Printer Listings

remain checked

until you clear them, or until you close the analysis file. These settings remain in effect when
viewing both Listings and Interpolations.

To print reports with column wrapping:

If you want to change the display of the open analysis file, but not report settings, select

Interpolation > Wrap Printer Listings

on the Run Menu bar. This setting will not change Printed

Report options previously set in the Preferences window. To change printed report settings, see

Preferences: Printed Report

, page

5-2

Viewing Statistics

The

Calculate

drop-down menu on the Run Menu bar allows you to view statistics, regardless of

whether the analysis window displays a graph, listing, or interpolation.

If you select

Pulses

Blockage Monitors

in the

View

drop-down menu, many of the options in the

Calculate

drop-down menu will not be available.

NOTE

The statistics displayed in the pop-up window are based on preselected Preferences settings. To add
or remove statistics, select

SOP > Edit Preferences / Statistics

on the Main Menu bar (page

5-15

To view statistics between cursors (graph view only):

If you are viewing a graph and have inserted two cursor points,

Calculate > Statistics

will display

results only for the portion of the analysis run included between the cursors.

If you have not included cursors, or if you have placed only one cursor in the graph,

Calculate >

Statistics

will display statistics based on the complete analysis run.

For information on placing cursors, see

Using Cursors in Graphs

, page

7-3

Summary of Contents for Multisizer 4















































































































































































































































Search results

Summary of Contents for Multisizer 4

Reviews:

Related manuals for Multisizer 4

Brands by name

Popular brands

Beckman Coulter Multisizer 4, User Manual

Search results

Summary of Contents for Multisizer 4

Reviews:

Related manuals for Multisizer 4

Brands by name

Popular brands