Bar Code Setup
Introduction
IMMAGE 800 Operations Manual A11403
System Setup
September 2016
Page 5-13
5
Bar Code Setup
Introduction
The bar code symbologies recognized by the IMMAGE 800 can be selected.
Additionally, the bar code parameters can be configured to match those of the sample
bar codes being read.
Enabling/Disabling Bar Code Symbologies
The instrument status must be in
Standby
in order to proceed with the steps below to
enable or disable bar code symbologies.
Figure 5.6
Bar Code Setup Screen
Step
Action
1
From the Setup screen, select
<3> Bar Code
2
To enable a bar code symbology select the check box beside the
symbology. If the check box is checked, the symbology is enabled.
3
To disable a bar code symbology deselect the check box beside the
symbology. If the check box is unchecked, the symbology is disabled.
The default is all bar code types enabled.
E010218S.EPS
