Beckman Coulter CEQ 8000 User Manual Download Page 45

Page: 45 / 382

Run Module

User’s Guide

Menu Bar Options

The menu bar has the options shown in Figure 23. Tables 11 through 18 describe the
options.

Capillary Buttons

- Letters

through

represent the eight capillaries in the array. Each

button selected will have an associated pane shown in the Display Area.

The

Status Bar

displays messages such as

•

Currently Active Database

- The active database name will be displayed.

•

Pause to Load

- If Pause to load has been selected, the wait time will be displayed.

The right areas of the status bar indicate which of the following keys are latched down:

•

CAP

- The Caps Lock key is engaged.

•

NUM

- The Num Lock key is engaged.

•

SCRL

- The Scroll Lock key is engaged.

Run Sample Plate

- Used to run the currently active plate.

Item Description

Summary of Contents for CEQ 8000






























































































































































































































































































































































































Search results

Summary of Contents for CEQ 8000

Reviews:

Related manuals for CEQ 8000

Brands by name

Popular brands

Beckman Coulter CEQ 8000, User Manual

Search results

Summary of Contents for CEQ 8000

Reviews:

Related manuals for CEQ 8000

Brands by name

Popular brands