Beckman Coulter CEQ 8000, User Manual

Page: 269 / 382

User’s Guide 255
Result Set Filtering
The first steps in the creation of a Study involve the application of a set of fragment
analysis parameters to analyze the raw sample data. These parameters are specifically
configured to process the fragment data for a particular sample or set of samples. The
outcome of this analysis is a result set of data consisting of characterized fragments
and identified alleles.
Specific “filters” are then used to scrutinize and selectively isolate results based upon
the parameters of the applied filters. In other words, the types of exclusions that you
apply to the data will “filter-out” all unwanted results from your Study. This process is
known as Result Set Filtering.
Accessing the Result Set View
The Result Set View can be viewed at any time while working with a Study by
opening the
View menu and selecting the
View Result Set
command or by clicking
on the
Result Set
icon located on the
Data
tab of the
Study Explorer
.
Figure 142:Result Set View window - Second Level Filtering
There are three key elements to the Result Set View window shown:
The
Fragment Results
table displays all analyzed samples, both included and
excluded, that have been selected for the Study. The displayed columns are
user-defined and can be modified to show a number of different system variables and
information.