Beckman Coulter CEQ 8000, User Manual

Page: 185 / 382

Quality Values
User’s Guide 171
The internal matches in the resulting Base Sequence and Trace view, after a
Sequence-based trimming has been applied, are replaced by the letter “x”, as shown in
Figure 105.
Batch Trimming
Batch trimming has been added to enable the automatic trimming of a large number of
results. To perform Batch Trimming, open the
Sequence Analysis module and follow
the steps outlined below.
1. From the Analysis Menu select
Batch Trimming
.
2. Select the Sequence Results or Sample Plate Results tab.
Figure 105:Base Sequence and Trace Views after Sequence-based Trimming – Enable
Internal Matches