Beckman Coulter BiomekFX, Quick Start Manual

Page: 21 / 60

2-6 Learning to Create Methods for the Biomek® FX
Beckman Coulter, Inc.
3. From the Deck Layout Display, double-click the reservoir on P4 to display
Labware Properties
(Figure 2-4).
Figure 2-4. Labware Properties for Reservoir on P4
4. In
Name
, enter Resv in
Labware Properties
.
5. In
Labware contains
, select Known from the pull-down menu.
6. In
volume
, enter 100000 . This means that you know you have 100000
microliters of liquid in the reservoir.
7. In
liquid type
, select Water from the pull-down menu.
Labware Properties
for
the Reservoir should look like Figure 2-4.
8. Choose OK to close
Labware Properties
.
9. Double-click the labware on
P5
and name it Dest1 in
Labware Properties
.
10. In
Labware contains
, select Known .
11. In
volume
, enter 50 .
Labware Properties
for the labware on P5 should look
like Figure 2-5.
12. In
liquid type
, select Water from the pull-down menu.
Labware Properties
for
the BCFlat96 should look like Figure 2-5.
13. Choose OK to close
Labware Properties
.
Figure 2-5. Labware Properties for Dest1
14. Double-click the labware on
P12
and name it Dest_S8 in
Labware
Properties
.
It is helpful to name
labware, particularly
when you use lots of
labware on the deck. You
can assign a name that
identifies the contents of
the labware or a
descriptive name that fits
the work being done in
the laboratory. Naming
labware can reduce
confusion.
Naming Labware
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com