Beckhoff TF6120, Manual

Page: 12 / 76

Installation
TF6120 12 Version: 1.1
6. Confirm the dialog with Yes .
7. Select Finish to exit the setup.
ð The TwinCAT 3 Function has been successfully installed and can be licensed (see Licensing [ } 12] ).
3.3 Licensing
The TwinCAT 3 Function can be activated as a full version or as a 7-day test version. Both license types can
be activated via the TwinCAT 3 development environment (XAE).
The licensing of a TwinCAT 3 Function is described below. The description is divided into the following
sections:
• Licensing a 7-day test version [
}
12]
• Licensing a full version [ } 14]
Further information on TwinCAT 3 licensing can be found in the “Licensing” documentation in the Beckhoff
Information System (TwinCAT 3 >
Licensing ).
Licensing a 7-day test version
1. Start the TwinCAT 3 development environment (XAE).
2. Open an existing TwinCAT 3 project or create a new project.