Beckhoff PS1111-2402-0002, Documentation

Page: 10 / 31

Technical data, mounting, wiring
PS1111-2402-0002 10 Version: 1.0
3 Technical data, mounting, wiring
3.1 AC input
AC input
AC input Nom. AC 100-240V Suitable for TN, TT and IT networks
AC input range Min. 90-264Vac Continuous operation
Min. 264-300Vac For up to 500 ms max.
Permissible voltage L or N to earth Max. 300Vac Continuous according to IEC 60664-1
Input frequency Nom. 50-60Hz ±6%
Turn-on voltage typ. 75Vac Static, see Fig. Input voltage range; switch-on behavior definitions
Shut-down voltage typ. 54Vac Static, see Fig. Input voltage range; switch-on behavior definitions
External input protection
See recommendations in chapter Safety instructions and installation requirements [
}
8]
AC input AC 100V AC120V AC230V
Input current typ. 1.15A 1.0A 0.60A At 24 V, 2.5 A, see Fig. Input current over out-
put current; power factor over output current
Power factor*) typ. 0.58 0.55 0.47 At 24 V, 2.5 A, see Fig. Input current over out-
put current; power factor over output current
Start-up delay typ. 50ms 50ms 48ms See Fig. Input voltage range; switch-on behav-
ior definitions
Rise time typ. 18ms 18ms 18ms At 24 V, 2.5 A constant current load, 0 mF load
capacity, see
Fig. Input voltage range; switch-
on behavior definitions
typ. 52ms 52ms 50ms At 24 V, 2.5 A constant current load, 2 mF load
capacity, see Fig.
Input voltage range; switch-
on behavior definitions
Turn-on overshoot Max. 100 mV 100 mV 100 mV See Fig. Input voltage range; switch-on behav-
ior definitions
*) The power factor is the ratio of real (or active) power to apparent power in an AC circuit.
Fig. 1: Input voltage range; switch-on behavior definitions
Fig. 2: Input current over output current; power factor over output current