Beckhoff KL8001, Documentation

Page: 7 / 47

Foreword
KL8001 and KL9060 7 Version: 2.0.0
1.3 Documentation issue status
Version Comment
2.0.0 • Migration
• Chapter Mounting rail installation revised
• Structural update
1.2.0 • Introduction and annex updated
• Ordering information updated
• Technical data updated
• Description of feature register updated
• Description of command register added
• Parameter registers PR33, PR40, PR46: resolution corrected
• Description of the Data registers corrected
1.1 • Technical data updated
• Description of the parameter registers extended
1.0 • Description of the parameter registers updated
• English version available
0.3 • Product overview revised
• Description of control and status byte revised
• Register description revised
• Ordering information extended
0.2 • Functional description revised
• Technical data updated
• Information about mounting and wiring added
• Application examples added
• Description of parameterization with KS2000 software added
• Description of the process image revised
• Register description amended
• Ordering information added
0.1 • First preliminary version
Firmware and hardware versions
Documentation
Version KL8001 KL9060
Measuring PCB K-bus PCB Firmware Hardware
Firmware Hardware Firmware Hardware
2.0.0 5 (=3C) 5 7 (=3D) 4 00 02
1.2.0 5 (=3C) 4 6 (=3C) 1 00 01
1.1 2 (=2A) 3 3 (=1C) 0 00 00
1.0 1 (=1B) 1 1 (=1B) 0 00 00
0.3 00 00
0.2 00 00
0.1 00 00
• The firmware and hardware versions (delivery state) of the KL9060 can be found in the serial number printed at the side of the
terminal.
• The firmware version of the measuring PCB of the KL8001 can be read from data register DR37 [ } 41] .
• The firmware version of the K-bus PCB of the KL8001 is shown in the header of the KS2000 Settings [
}
25] dialog for KL8001
• The hardware version of the measuring and K-bus PCB of the KL8001 is coded in the serial number of the KL8001.
Syntax of the serial number for KL9060
Structure of the serial number: KK YY FF HH