Product overview
KL26xx/KS26xx
22
Version: 2.5.0
Operation modes
•
MANUAL
:
The coil control is interrupted. The relay is actuated only with the red manual operation switch
•
AUTO
:
Actuation of the relay via the controller. Manual state changes via the red manual operation switch are
reset by the controller after less than 500 ms.
Example
Fig. 8: KL2641
The relay conforms to the international standards according to IEC and EN 61810 Part 1 / VDE 0435 Part
201 as well as the requirements for short-term overcurrents and protection against short-circuit according to
IEC and EN 61036 / 61037.
