Beckhoff KL2535, Documentation, Page: 43 / 49

Access from the user program
R31: Code word register
If you write values into the user registers without first entering the user code word (0x1235) into the code
word register, the terminal will not accept the supplied data. The code word is reset if the terminal is
restarted.
R32: Feature register
The feature register specifies the terminal's configuration.
Bit R32.15 R32.14 R32.13 R32.12 R32.11 R32.10 R32.9 R32.8
Name disMixedDecay - - - - - - enUserStartValue
Bit R32.7 R32.6 R32.5 R32.4 R32.3 R32.2 R32.1 R32.0
Name - enRamps enDithering enValveCurve enAverageNotation disWatchdog enManuScale enUserScale
Legend
Bit Name Description default
R32.15 disMixedDecay 1
bin
Mixed Decay is deactivated 0
bin
R32.14-R32.9 - reserved
R32.8 enUserStartValue 1
bin
User switch-on value active (see R35 [ } 43] )
0
bin
R32.7 - reserved
R32.6 enRamps 1
bin
Process data ramps [
}
17] are active (see R45
[
}
44] + R46 [
}
45] )
0
bin
R32.5 enDithering 1
bin
Dithering [ } 15] is active (see R37 [ } 44] , R38
[ } 44] + R39 [ } 44] ); bit CB1.0 [ } 38] = 1 must be
set in addition
0
bin
R32.4 enValveCurve 1
bin
Valve curve [
}
16] is active (see R40 [
}
44] , R41
[
}
44] , R42 [
}
44] , R43 [
}
44] + R44 [
}
44] )
0
bin
R32.3 enAverageNotati
on 0
bin
Two’s complement representation is active 0
bin
1
bin
Signed amount representation active
R32.2 disWatchdog 1
bin
Internal 100 ms watchdog deactivated 0
bin
R32.1 enManuScale 1
bin
Manufacturer scaling is active 0
bin
R32.0 enUserScale 1
bin
User scaling active (see R33 [
}
43] + R34 [
}
43] )
0
bin
R33: User scaling - offset
If user-scaling is active ( R32.0 [
}
43] =1) this register specifies the offset for the user-scaling.
R34: User scaling - gain
If user-scaling is active ( R32.0 [
}
43] =1) this register specifies the gain for the user-scaling.
R35: User's switch-on value
If the user switch-on value is active ( R32.8 [ } 43] =1) and if the activated watchdog ( R32.2 [ } 43] =0
bin
)
triggers following a fieldbus or terminal bus error continuing for 100 ms, the output will be set to this value.
R36: Maximum output current
This register specifies the maximum output current. The unit is 1 mA (for example: 1000
dec
= 1 A).
KL2535: maximum 1000 mA (default: 1000
dec
)
KL2545: maximum 3500 mA (default: 3500
dec
)
KL2535, KL2545 43 Version: 2.0.0