Beckhoff EK1960 Series, Operating Instructions Manual

Page: 39 / 145

Operation
EK1960 39 Version: 1.3.1
Fig. 18: Mounting the EK1960 on the DIN rail
The EK1960 is released from the DIN rail by opening the two clamps on top of or underneath the device. To
do this, insert a screwdriver into the recess provided and open the clamp until it latches.
Fig. 19: DIN rail clamp closed
Once the two upper or lower clamps are unlocked, the device can be taken off the DIN rail in an upward or
downward direction.
Fig. 20: DIN rail clamp opened