Parameterization and commissioning
EK18xx
41
Version: 2.2
6
Parameterization and commissioning
6.1
Configuration overview
More detailed information on the configuration settings can be found in the
on the Beckhoff website.
6.2
Overview of process data
In the TwinCAT System Manager, enter the EK18xx as an EtherCAT (Direct mode) device in Config mode
under Devices. If the Bus Coupler is already connected to the network, it can be read. This will cause all the
Bus Couplers with Bus Terminals and their configurations to be loaded. You can then adapt these to meet
your requirements.
6.2.1
EK1814
Fig. 34: TwinCAT tree EK1814
