Parameterization and commissioning
CXxxxx-M930/B930
34
Version: 1.1
7. In the context menu click on
Autostart Boot Project
.
The setting is selected
8. Right-click on the project folder in the tree view.
9. In the context menu click on
Auto Save to Target as Archive
.
The setting is selected.
ð
You have successfully loaded the CX configuration. From now on, TwinCAT will start in Run mode and
the PLC project will start automatically.
Next, the master can be added in a new project in the System Manager and can then be used to find
slaves that have already been set up.
