Beckhoff CPX29 0000 Series, Installation And Operating Instructions Manual

Page: 17 / 39

Product overview
CPX29xx-0000 17 Version: 0.2
4.3 Description of the interfaces
1 4 2 3
5
5 6 7
Fig. 5: Interfaces of the Control Panel CPX29xx-0000.
Nr Interface Nr Interface
1
DVI-D In (X106) [
}
18]
5
USB out (X102, X103) [
}
17]
2
USB-E In (X105) [ } 18]
6
Ground [ } 19]
3
USB In (X104) [
}
18]
7
Power supply (X101) [
}
17]
4
Mounting bracket (see: Using the mounting bracket [
}
25] )
4.3.1 Power supply (X101)
X101
Socket 5-pol RM3.50 Sw Screw Clamp BL3.5/180F (WEIDMÜLLER 1615810000)
The power supply for the Control Panel is established via the socket ( X101 ). The power supply connector is
included in delivery.
Pin Signal Pin Signal
1 NC 4 GND Power Supply
2 NC 5 + 24 VDC
3
4.3.2 USB out (X102, X103)
X102, X103
USB Type-A twin circuit board mounting (FCI 72309-0030B USB Double Receptacle A-
Type)
The two USB interfaces ( X102, X103 , connector type A) are used for connecting peripheral devices with
USB connection. USB3.0 standard is supported in a distance of up to 3 m from the PC, from a distance of 3
m up to 50 m or if using USB-Extended, USB2.0 standard is supported.
Pin Signal Pin Signal
1 5V 3 D+
2 D- 4 GND