Beckhoff CB3067, Original Manual

Page: 51 / 108

BIOS settings
CB3067 51 Version: 1.0
8.3.14 SATA und RST Configuration
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
┌─────────────────────────────────────────────────────────────────┬───────────────────────────────┐
│ SATA And RST Configuration │Enable/Disable SATA Device. │
│ │ │
│ SATA Controller(s) [Enabled] │ │
│ SATA Mode Selection [AHCI] │ │
│ SATA Test Mode [Disabled] │ │
│> Software Feature Mask Configuration │ │
│ Aggressive LPM Support [Disabled] │ │
│ │ │
│ Serial ATA Port 0 Empty │ │
│ Software Preserve Unknown │ │
│ Port 0 [Enabled] │ │
│ Hot Plug [Disabled] │ │
│ Configured as eSATA Hot Plug supported ├───────────────────────────────┤
│ External [Disabled] │→←: Select Screen │
│ Spin Up Device [Disabled] │↑↓: Select Item │
│ SATA Device Type [Hard Disk Drive] │Enter: Select │
│ SATA Port 0 DevSlp [Disabled] │+/─: Change Opt. │
│ DITO Configuration [Disabled] │F1: General Help │
│ │F2: Previous Values │
│ │F3: Optimized Defaults │
│ │F4: Save & Reset │
│ │ESC: Exit │
│ │ │
└─────────────────────────────────────────────────────────────────┴───────────────────────────────┘
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Bios entry Options
SATA And RST Configuration
SATA controller(s) Enabled / Disabled
SATA Mode Selection AHCI
SATA Test Mode Disabled / Enabled
Software Feature Mask Configuration
Submenu see: Software Feature Mask Configuration [
}
52]
Aggressive LPM support Disabled / Enabled
Serial ATA port 0 - 3 None
Software Preserve None
Port 0 Disabled / Enabled
Hot Plug Disabled / Enabled
Configured as eSATA None
External Disabled / Enabled
Spin Up Device Disabled / Enabled
SATA Device Type HDD / SSD
SATA Port 0 DevSlp Disabled / Enabled
DITO Configuration Disabled / Enabled
NOTE
Settings on SATA ports 0 - 3
The possible settings on SATA ports 0-3 are identical. Therefore, these are summarized in the illustration.