manualshive.com logo in svg

Beckhoff C6032, Manual

Share
Download
Beckhoff C6032 Manual Download Page 39

Maintenance

C6032

39

Version: 2.0

7

Maintenance

 CAUTION

Risk of electric shock

Working on the Industrial PC while it is live can lead to electric shock.

• Turn off the supply voltage before cleaning the device or replacing device components. This does not

apply to the replacement of hard disks in a RAID configuration.

Maintenance measures increase the efficiency of the device by ensuring long-term functionality. Cleaning
and maintenance of certain device components and the replacement of other device components contribute
to this.

Repair

Only the manufacturer may repair the device. If a repair should be necessary, contact Beckhoff Service (see
Chapter 10.1 Service and support).

7.1

Cleaning

NOTE

Unsuitable cleaning agents

The use of unsuitable cleaning agents can damage the device.

• Only clean the Industrial PC as specified.

It is essential to observe the following aspects when cleaning the Industrial PC:

• Make sure that no dust gets into the PC.

• Always keep the ventilation slots clear.

• Only use a vacuum cleaner to clean the PC. The Industrial PC does not have to be switched off for

this.

• Never use compressed air to clean the PC.

Summary of Contents for C6032






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands