Product Description
C3620, C3640
9
Interfaces from C3620/ C3640-0060
ATX motherboard
interfaces
PS/2 connections
PS/2
The upper PS/2 connector (
X104
) allows a PS/2 mouse to be used, while a
PC keyboard can be connected to the lower PS/2 connector (
X103
).
USB interfaces
USB1
– USB4
The four USB interfaces (
X108
–
X111
) are used to connect
peripheral devices with USB connections:
▪
Devices with Intel
®
4
th
generation processors
(C3620/ C3640-0060) are equipped with 2 USB2.0 (
X110
,
X111
) and 2 USB3.0 (
X108
,
X109
) interfaces.
▪
Devices from Intel
®
6
th
and 7
th
generation processors
(C3620/ C3640-0070) are equipped with 4 USB3.0
interfaces.
Network connection
LAN1, LAN2
The RJ-45 connectors (
X112, X113
) allow the PC to be connected to a
10/100/1000BASE-T Local Area Network (LAN).
DVI-D (Digital Visual Interface)
DVI out
The DVI connectors (
X114
,
X115
) are used for transferring the video
signal. DVI-D standard is supported.
Serial interfaces
RS 232
COM1
– COM2
The basic version of the Industrial PC has one serial interface, COM1
(
X116
), using the type RS 232, which is brought to a 9 pin SUB-D plug
connector.
DisplayPort
DisplayPort
The DisplayPort (
X117
) is used for transferring the video signal.
Sound-On-Board
Sound
The Industrial PC has an on-board-interface with the following connectors:
Line In (
X122
), Line Out (
X121
) and Microphone jack (
X120
).
Additional plug-in cards (optional)
Type plate
There is a type plate on the top of the Industrial PC which provides
information about the hardware configuration of the Industrial PC at the
time it was supplied.
Summary of Contents for C3620
Page 2: ......
