Beckhoff AG2800, Operating Instructions Manual

Page: 44 / 51

Maintenance and cleaning
44 ─── Version: 2.0 AG2800
10.2
Intervals
Under nominal conditions, the motor components have different op-
erating hours. We have provided you with a list of maintenance work
and intervals for the associated components below:
Component Interval Maintenance
Gear unit During commission-
ing
Thereafter:
Every three months
Check gear unit for external damage and leaks
Check drive shaft and output shaft for foreign media such as oil
and dirt
Check gear unit for corrosion
Clamping screw
Motor attachment During commission-
ing
Thereafter:
Every three months
Check tightening torques
Fastening screw
Gear unit housing During commission-
ing
Thereafter:
Every three months
Check tightening torques
10.2.1
Lubrication
Notes on lubrication
Beckhoff gear units from the AG2800 series are lubricated for life.
The lubricant used does not have to be renewed.
If you wish to change the lubricant, contact Beckhoff Service.
All gear units are lubricated for life with a food-safe synthetic lubri-
cating grease consisting of hydrocarbon oil and aluminum complex
soap. Refer to the name plate for detailed information on lubrication.
All bearings are lubricated for life at the factory.
Further information on the lubricants can be obtained directly from
the manufacturer:
Lubricants for the food industry, U SDA-H1 registered
Klüber Lubrication München KG
Munich
Phone: + 49 89 7876-0
www.klueber.com