Beckhoff AG2250, Operating Instructions Manual

Page: 73 / 95

Transport and storage
Version: 2.8 ─── 73 AG2250
Avoid damaging the gear unit
Observe the conditions and the following chapters on transport and
storage.
Disregarding the conditions can lead to damage to the gear unit
and invalidation of the guarantee.
6.1
Conditions
Make sure that the gear units are not damaged during transport and
storage.
Observe the specifications in the following chapters and comply with
the following conditions:
• Climate category: 2K3 according to EN 60721
• Temperature: -25 °C to +60 °C, maximum fluctuation 20 K/hour
• Humidity: relative humidity 15% to 95%, no condensation
• Use of suitable means of transport
• Transport and storage only in a horizontal position
• Use of the vendor's original packaging
6.2
Transport
WARNING
Do not move under suspended loads
Use suitable means of transport and secure the gear unit against
falling down.
If the gear unit falls down it can cause a fatal accident.
Use means of transport with a sufficient lifting capacity
Use means of transport or hoists with a sufficient lifting capacity to
transport the gear unit. Ensure secure fastening. Avoid impacts
against the gear unit.
Means of transport with an insufficient lifting capacity can tear and
thus damage the gear unit or motor/gear unit combination due to
falling down or impacts.
Legal regulations for the lifting of loads
When transporting individual gear units or motor/gear unit combina-
tions without a hoist, adhere to the legal requirements for the lifting
of loads by employees.