C90424
Rev. D
Capacity ratings
9 watt
-max 650 gallon pond, max
pump flow 600 gph
13 watt
-max 1200 gallon pond,
max pump flow 870 gph
Maximum pump pressure is 5 PSI
(12’ lift)
WARNING!
•
This product is not submersible, for out of pond use only.
•
Never directly touch the UV bulb – oil from your fingers
can shorten bulb life.
•
If the UV’s internal components get wet, unplug the unit
immediately.
•
Do not operate the UV Assembly with a missing or
damaged Quartz sleeve.
CAUTION!
•
To prevent risk of electric shock, unplug
unit before servicing or replacing lamp.
•
Do not look directly at UV lamp.
•
WARNING! Connect to a receptacle
protected by a ground-fault circuit
interrupter (GFCI).
This design
features an
inlet/outlet on each
end. Flow direction
can be either way.
As the pump (not included) circulates water through the filter the UV exposure produces clean clear water.
UV9-WATT / UV13-WATT INSTRUCTIONS
1
2
3
4
5
10
6
8
9
11
7
Parts Detail:
1) UV Cap with switch and power cord
2) Cap O-ring, Quartz glass O-ring
3) Quartz glass assembly
4) 9 or 13 watt UV bulb (G23 2 pin)
5) Enclosure housing
6) Enclosure O-ring
7) Bulb stabilizer
8) Outlet/Inlet O-rings
9) 90° Elbow adapters
(1/2” & 5/8”)
10) Straight adapters require
Teflon thread tape to seal
11) Light Ballast (not a pump)
Summary of Contents for UV9-WATT
Page 7: ......
