Burner Start Up Information & Test Data
Beckett Model ____________________
Serial Number_______________________
Job Location_____________________________________________________________
Start Up Date_____________ Company Name_________________ Technician Name________________
Type of Gas:
NAT____
Propane____
Gas Pressure at Train Inlet Flame Signal Readings
Draft @ Breech
Burner off position ______w.c Low Fire _______DC volts
High Fire _______DC volts
High Fire_________w.c
Gas Pressure Train Inlet
O2
Net Stack Temperature
Light-Off ________w.c
Light-Off _______%
High Fire ________w.c
High Fire _______%
High Fire _________degrees
Gas
Pressure
at
Burner
CO
Combustion
Efficiency
Light-Off ________w.c
Light-Off _______%
High Fire ________w.c
High Fire _______%
High Fire _________%
Power Supply
Input Rate BTU/HR
Air Damper Settings
Volts____
PH____
Hz____
Shutter___________
High
Fire_______
Band___________
Control Settings
:
Operating Control Cut/Out Limit Control Cut/Out Setting Low/High Gas Pressure
____________________
________________________
_________/___________
Operating Control Cut/In Setting Limit control Cut/In Setting
_______________________ _______________________
Checked for Proper Operation
YES NO
Checked for Proper Operation
YES NO
Low water cut off
Barometric Damper
High water cut off
Boiler Room combustion air
Flame Safeguard control ignition failure
All gas lines checked for leaks
Flame Safeguard control main flame failure
Gas lines and controls properly vented
Burner air flow switch
Other system components specify
Notified___________________________ of the following system deficiencies__________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
