Becker P3/30PSF, Assembly And Operating Instructions Manual, Page: 3 / 16

3
Structural modifications and incorrect installation which are not in accordance with these and our other instructions can result
in serious injuries, e.g. crushing of limbs. Therefore, structural modifications should only be carried out with our prior approval
and in accordance with our instructions, particularly the information contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intended use is not permitted.
The end product manufacturer and fitter have to ensure that all the current statutory, official regulations and, in particular,
EMC regulations are adhered to during utilisation of our products, especially with regard to end product assembly, installation
and customer advice.
Warranty
Safety Information
The following safety instructions and warnings are intended to avert hazards and to prevent damage to property and personal
injuries.
Please retain for future reference.
Caution
Note
Attention
Denotes a potentially hazardous situation. If this is not avoided, injuries may
result.
Important safety instructions for the user
Caution! Failure to observe these instructions can lead to serious injuries.
• All operational work including maintenance and cleaning, on electrical installations as well as other parts of the
construction must always be performed by authorised specialists, especially by qualified electricians.
• Do not allow children to play with control units.
• Systems have to be regularly checked by authorised specialists for wear and damages.
• Always put damaged systems out of operation immediately until they are repaired by an authorised specialist.
• Do not operate equipment if people or objects are within the danger zone.
• Observe the danger zone of the equipment during operation.
• Bring the equipment to a stop and disconnect the mains power supply when maintenance and cleaning jobs are
performed either on the system itself or in the immediate vicinity of it.
• Ensure that there is an adequate distance (at least 40 cm) between moving parts and adjacent objects.
• Crushing and shearing points must be avoided or protected.
Denotes a potentially hazardous situation. If this is not avoided, the product
or something in its vicinity may be damaged.
Denotes user tips and other useful information.