84
User settings
User settings
Opening / quitting User
Settings menu
After requesting the user settings, the
following basic settings can be selected
according to your personal preferences.
•
Gal
- Speed-dependent volume
control (GAL)
•
Tel
- Telephone response
•
Lum
- Display brightness
•
Led
- Adjusting LED
•
M/S
- Adjusting reception
optimisation
•
Aux
- Adjusting the AUX input
•
BeV
- Adjusting signal tone volume
X
The user menu is requested by press-
ing the
button for longer than 2
seconds.
X
Press the
button again to quit
the user menu.
Setting the GAL (Gal)
The GAL is a car radio control circuit,
which automatically adjusts the car ra-
dio volume according to vehicle speed.
This results in compensation of the driv-
ing noise produced at higher speeds.
X
Calling up the user menu.
X
Press the
multifunction button.
X
With the right rotary control
, select
either
0
or
+15
.
The GAL setting can be used to specify
the starting point for the volume increase
according to vehicle speed.
The setting is stored automatically.
The settings are:
•
0
- No volume increase
•
+1
- Volume increase is initiated at
low speed
•
+15
- Volume increase is initiated at
higher speed
Telephone mute function (Tel)
If a telephone with hands-free operation
is installed, the call may be routed
through the speaker system. This elimi-
nates the need for an additional speaker.
However, the signal leads (AF – Tele-
phone input and Earth – Telephone in-
put) must be connected to the car radio
(see also page 98).
X
To set, call up user menu.
X
By pressing multifunction button
, select
Audio Sig.
or
Mute
.
•
Mute
- Telephone Mute setting
•
Audio Sig.
- Telephone conversa-
tion via car radio