Becker IC6100-2-(01), Installation And Operation Manual

Page: 22 / 45

Page 2-2
IC6100
2.5 Aircraft / Helicopter wiring
2.5.1 General
The plug and socket connection is shown from Fig. 2-5 to Fig. 2-11. The following points are to be ob-
served for the wiring :
a. Only cable fit for aviation (self-extinguishing) shall be used. AWG 20 for power supply and AWG 24
for other cables.
b. The interface lines are each to be laid as 2-core twisted and screened (AWG 24) cables.
c. Every single cable harness of a unit connector must have separate screening.
d. Rubber sleeves are to be fitted over the soldering points on the unit connector.
e. A fuse or circuit breaker should be fitted in the power supply of the Intercom Amplifier Unit.
f. No RF cable should be included in the cable harnesses. Laying connecting cables together with ca-
bles which cary AF power or impulses is to be avoided.
g. Check the wiring carefully before switching on the units, particularly that (UB+) and (GND) have not
been mixed up.
DV 64480.DIC.01 Issue 1 Sep./2013