manual / automatic
You can display and select the "Manual" or "Automatic" setting by pressing the
STOP button. Only manual drive commands and emergency signals can be
performed with the "Manual" setting. In addition, automatic drive commands
are also performed in the "Automatic" setting. The automatic functions are not
interrupted if a manual drive command is carried out when in automatic mode.
3s
Press the STOP button for 3 seconds to display
the current status.
Automatic
mode
:
The LED ring lights up
green
.
Manual mode
:
The LED ring lights up
red
.
Different
modes
:
The LED ring lights up
yellow
.
5s
You can toggle between manual and automatic
mode by pressing the STOP button for 5 seconds.
Identification of the hand-held transmitter
A colour can be assigned to the LED ring of the hand-held transmitter by
pressing the function button to make the device easier to identify. The stored
colour can be displayed by briefly pressing the function button. If the function
button is pressed for longer than 3 seconds, the LED ring flashes briefly. The
required colour can now be set by pressing the
or
button. 9 colours are
available: press the function button again for longer than 3 seconds to store
the colour currently selected.
Battery status
Battery status low
LED ring flashes yellow 4 times following normal
feedback.
Battery status empty
LED ring flashes red 4 times following normal
feedback.
20 - en
