![Becker Centronic VarioControl VC470-II Assembly And Operating Instructions Manual Download Page 23](http://html.mh-extra.com/html/becker/centronic-variocontrol-vc470-ii/centronic-variocontrol-vc470-ii_assembly-and-operating-instructions-manual_2718493023.webp)
Intended use
The radio receiver described by the present instructions must only be used for
the operation of awning and blind control units.
•
Please note that radio-controlled systems may not be used in areas with
a high risk of interference (e.g. hospitals, airports).
•
The remote control is intended solely for use with equipment and sys-
tems in which malfunctions in the transmitter or receiver would not pose
any risk to persons, animals or property, or which contain safety devices
to eliminate such risks.
•
The operator is not protected from interference from other telecommu-
nications systems and terminal equipment (e.g. even from radio-con-
trolled systems which are properly operated in the same frequency
range).
•
Only connect radio receivers to devices and systems approved by the
manufacturer.
•
Ensure that the control unit is not installed or operated
close to metal surfaces or magnetic fields.
•
Radio-controlled systems transmitting on the same fre-
quency may cause reception interference.
•
Note that the range of the radio signal is limited by legis-
lation as well as by design.
23 - en