Checking the intermediate position I
Press the DOWN button twice within one second.
The shading solution runs to the intermediate position I.
Deleting the intermediate position I
Press the intermediate position I programming button
for longer than
5 seconds. The indicator lamp will then flash briefly three times.
The intermediate position I is now deleted.
Intermediate position II
Application
Function
Roller shutter operation
Ventilation
Awning operation
Fabric tension
Venetian blind operation
Turning
This function allows you to open the shading solution from
the lower limit position until the desired intermediate posi-
tion II is reached. Both limit positions must be set before the
intermediate position II is set.
Setting the intermediate position II
Requirement: The shading solution is in the lower limit position.
1.
Press the intermediate position II programming button and keep it
pressed.
2.
Also press the
UP
button until you have reached the desired intermediate
position II. You can make a correction with the
UP
button or the
DOWN
button.
3.
Release the intermediate position II programming button . The indic-
ator lamp will then flash briefly three times.
The intermediate position II is now saved.
Checking the intermediate position II
Press the UP button twice within one second.
The shading solution runs to the intermediate position II.
Deleting the intermediate position II
Press the intermediate position II programming button for longer than
5 seconds. The indicator lamp will then flash briefly three times.
The intermediate position II is now deleted.
35 - en
Summary of Contents for Centronic UnitControl UC520
Page 57: ...57 fr...
Page 76: ......
