Becker centronic sunwindcontrol swc52, Assembly And Operating Instructions Manual, Page: 32 / 100

32
Assembly and Operating Instructions
Connection as a drive controller
Warning
• Risk of injury by electric shock.
• Terminal connections must be carried out by an authorised electri-
cian!
• If more than one drive is controlled using the SWC52, the drives must
be decoupled by relay controls. This decoupling is not applicable to
Becker drives with electronic limit stop.
Always observe the switched current of the device.
1. Connect the power supply unit to the SWC52 as follows:
2. Put the protective caps back on the power supply unit.
3. Fix the power supply unit in the box.
4. Put the operating device in the frame and plug it into the power supply unit.
Sensor
green/yellow
blue
brown/black
bridge
Tubular drive
central
command
black/brown
SWC52