Becker Centronic MemoControl MC411-III, Assembly And Operating Instructions Manual

Page: 27 / 76

Commissioning of Centronic
For the setting of limit positions and configurations please
refer to the instructions for the Centronic receiver.
Explanation of symbols
Up/retract button
STOP button
Down/extend button
Programming button (on the transmitter )
Receiver confirms once or multiple times by
“clicking” or “shifting”
Programming the transmitter
Putting the receiver into programming mode
Follow the Assembly and Operating Instructions for the re-
ceiver.
• Switch off the power supply to the receiver for 5 seconds, then switch it
back on.
or
•
Operate the programming button or the radio switch of the receiver.
The receiver is now in programming mode for 3 minutes.
27 - en