Becker CASCADE PRO Operation Manual Download Page 207

Page: 207 / 254

207

Voice mode

Commands in the Edit Station menu

The following commands are available
in the Edit Station menu for the VHF
wavebands - Alphabetical and VHF -
according to quality:

• Filter station to be edited.

Say the command

Filter stations

Filter current station

• Store station to be edited (page 77).

Say the command

Save station

Save station name

• Set station to be edited as TP station

(page 74).

Say the command

Set as traffic

programme

[Set] station as traffic

programme

The following commands are available
in the Edit Station menu for the wave-
band station memory:

• Set station to be edited as TP station

(page 74).

Say the command

Set as traffic

programme

[Set] station as traffic

programme

• Store current station (page 77).

Say the command

Save current

station here

Save [[current] [sta-

tion [here]]]

• Delete station (page 79).

Say the command

Delete [station]

• Move station in memory (page 78).

Say the command

Move station

• Name station in memory (page 79).

Say the command

Name station

• Create voice entry (page 80).

Say the command

Create voice

entry

• Delete voice entry (page 80).

Say the command

Delete voice

entry

• Listen to voice entry (page 80).

Say the command

Read out voice

entry

Listen to voice entry

3017

Summary of Contents for CASCADE PRO































































































































































































































































Search results

Summary of Contents for CASCADE PRO

Reviews:

Related manuals for CASCADE PRO

Brands by name

Popular brands

Becker CASCADE PRO, Operation Manual

Search results

Summary of Contents for CASCADE PRO

Reviews:

Related manuals for CASCADE PRO

Brands by name

Popular brands