What to do if...?
Problem
Remedy
Drive is not functioning.
Check connection.
Drive is running in the wrong direc-
tion.
Swap the and
wires at the radio
receiver.
The radio receiver does not perform
manual run commands.
Program transmitter.
Connect the external button cor-
rectly.
The radio receiver does not perform
automatic run commands.
Program transmitter.
Set the transmitter to automatic
mode.
Intermediate position I / II cannot be
programmed.
Perform the programming run in ac-
cordance with the instructions for the
B-Tronic transmitter.
Programming failed.
Set the same function at the trans-
mitter and receiver.
The feedback is not plausible (func-
tion switch in position 1, 2, 8 or 9)
Delete and restart the programming
run in accordance with the instruc-
tions for the B-Tronic transmitter.
The feedback is not plausible (func-
tion switch in position 1 or 2)
Reset the radio receiver back to the
factory setting. Depending on the
shading solution, set the function
switch to position 8 or 9. Put the
device back into operation.
The intermediate position/tilt posi-
tion is not moved to correctly (func-
tion switch in position 8 or 9)
Always move to the intermediate po-
sition/tilt position from the corres-
ponding limit position.
16
