Deleting a B-Tronic transmitter from a KNX RF
compatible receiver from another manufacturer
Please find the appropriate description in the instructions for the receiver or
on our website.
Setting the limit positions of B-Tronic tubular
drives
Changing the direction of rotation
Check the direction of rotation before setting the limit positions. The shading
solution must move in the correct direction when the UP or DOWN buttons are
pressed.
If this is not the case, please carry out the following steps to change the direc-
tion of rotation:
No limit positions must be programmed. Delete the limit positions if neces-
sary.
Put the transmitter into master mode.
Select the receiver by pressing the button until the desired receiver con-
firms.
Press the programming button and, within the
next 3 seconds, also press both the UP and
DOWN buttons for 3 seconds.
▻
The tubular drive clicks 3 times to con-
firm.
Check the running direction again.
15
Summary of Contents for B-Tronic EasyControl EC5415B
Page 36: ...4035 630 004 0c 21 04 2015...
