Fig. 7
Warning:
Jack may be left freestanding, but to be mounted, ensure
panel is
less than 4mm thick
otherwise shaft may not protrude
enough to engage with nut. If necessary, use dremel, sander etc. to thin
panel or choose alternate mounting location.
Operation
1.
Use included 3.5mm audio cable (See
Fig. 8
) to connect audio device to the
jack
Fig. 8
3.5mm male to male cable
2.
Press the CD or unique set of buttons on Radio to enter CD Changer Mode.
Radio display will change to Track or Disc numbers (
At least one disc must
remain in CD Changer
.)
3.
Select a track on audio device. Selected track will play on the car stereo.
Warning!
Playlist and Track selection is *NOT* possible from the radio.
You must use the Audio device built-in controls to access music files.
4.
Use radio volume knob to adjust playback level
Note:
if playback is distorted, lower volume on audio device.
5.
To listen to the CD changer, simply
disconnect audio device from the
AUX-BKR jack
and operate Changer as customary.
Warning! AUX-BKR Audio jack must be empty when listening to the CD
Changer; otherwise, CD Changer playback will be weak or distorted.
6.
If correct operation is confirmed go ahead and reinstall Radio
