87
NAVIGATION MODE
>>>
The Navigation device constantly checks
whether there are any relevant
announcements for the route that has
been set. All traffic problems that have
been received are shown on the map.
If the continuous checks determine that
a traffic announcement is relevant to
route guidance, the unit can
automatically recalculate a new route to
the destination (See "The TMC or Traffic
button (model dependent)" on page 77).
Live Traffic - Traffic Announce-
ments via Data Connection
(model dependent)
Your navigation device can receive traffic
announcements from a server via a data
connection. These announcements are
more up-to-date than data received via
TMC and are also available more quickly.
There must also be an appropriate data
connection. Subsequent use of the traffic
announcements is the same as de-
scribed below for TMC.
If a connection to the server is not possi-
ble, the system then tries to switch over
to TMC traffic announcements (model
dependent). As soon as TMC is displayed,
there is no connection to the Life Traffic
server.
In the Chapter entitled Wi-Fi® Settings
on page 142 we describe how to create a
data connection.
Note:
As the traffic announcements are
transmitted by radio stations, we cannot
assume responsibility for the
completeness or accuracy of the
announcements.
Austria: The location and event code
was made available by ASFINAG and
BMVIT.
Notice:
The data transmission via your mobile
phone may involve additional costs de-
pending on the mobile phone contract.
Please find out from your mobile phone
provider before activating. If a connec-
tion to the server is not possible, e.g. be-
cause no mobile phone network is
available for a longer period of time,
then the system switches over auto-
matically to TMC until a connection to
the server is possible again.
With this button you can
specify the time a traffic
congestion bypass will save
before it should be displayed.
Values between 3 minutes
and 30 minutes of time-
saving are available.