7.
Test for engine noise. If present a noise filter (not included) may be
added. We recommend purchasing our
Warning
:
Some BMW and Mercedes have a Solid A/B plug that will NOT mate with our
harness. To resolve this, you must purchase conversion harness below: (BHA1784_iso)
http://www.discountcarstereo.com/bha1784_iso.html
8.
Secure adapter box and proceed to next section.
Enabling the AUX function
the most important step in this process is to
enable the AUX function within
the radio menu
. Most Becker radios are pre-programmed to recognize a CD
Changer connection and because of that you must perform the following steps
and change the setting to “AUX” otherwise the radio will not recognize the
adapter.
Radios with TP button: (i.e. CDR-220)
1.
Turn radio "ON"
2.
Press and hold the "TP" button for about 8 seconds until Becker 1 is
displayed.
3.
Turn the Tuning Knob until AUX OFF is displayed.
4.
Press either button located directly under the Arrows on the display to
change the present setting from OFF to ON.
Turn radio OFF.
5.
Turn Radio back ON, press the “
S
” (Source) button to enter AUX Mode.
This is the mode to use whenever you want to listen to the device
connected to the adapter.
Radios with
☼
button: (i.e. BE6104)
1.
Turn Radio “ON”
2.
Press and hold the
☼
button for about 8 seconds.
3.
Select AUX “ON/OFF” option.
4.
Press either button located directly under the Arrows on the display to
change the setting to ON.
5.
Turn radio OFF.
6.
Turn Radio back ON press the “
☼
” button until “AUX” is displayed.