Becker 0622.834-923, Installation And Operation Manual

Page: 30 / 52

Operating Instructions
Frequency Selection Modes
30 GK61X-XX DV16800.03 Issue 03 08/2015
3.4.1. Standard Mode
Press the "MDE" key until the standard mode page appears.
The standard mode page displays the active frequency in the top line and preset frequency in the
bottom line.
118.005
127.000
IC
SQL
Changing the active frequency is not possible in standard mode (only available in direct tune mode)
but changing the preset frequency is possible.
Changing the preset frequency in standard mode:
• Make a "short press" on the "ROTARY ENCODER" for modification of the 100 MHz digits.
Rotate the "ROTARY ENCODER" clockwise/counter clockwise to change the frequency in
1 MHz steps.
118.005
128 .000
SQL
• Make another "short press" on the "ROTARY ENCODER" for modification of the 100 kHz
digits.
Rotate the "ROTARY ENCODER" clockwise/counter clockwise to change the frequency in
100 kHz steps.
118.005
128. 0 00
SQL
• Make another "short press" on the "ROTARY ENCODER" for modification of the
25/8.33 kHz digits.
Rotate the "ROTARY ENCODER" clockwise/counter clockwise to change the frequency in
25/8.33 kHz steps.
128.0 00
SQL
118.005
A short press of the "↨/SCN" key, exchanges active frequency to preset frequency and vice versa.
If wanted, please press now the "STO" key to store the active frequency into the next vacant memory
place of the user channels database.
Note: While the transceiver operates in transmit mode, the toggle function is disabled.