Attention
Safety instructions for avoiding property damage.
•
Ensure that there is adequate clearance between moving parts and adjacent objects.
•
The drive must not be carried by the mains connecting cable.
•
All latching connections and fastening screws on the brackets must be checked to en-
sure that they are secure.
•
Ensure that nothing rubs against the tubular drive, such as shading solution attach-
ments, screws, etc.
Intended use
PR+SMI
PS(+)SMI
The PR+SMI type of tubular drive described in these instruc-
tions is intended solely for the operation of roller shutters.
This type of tubular drive supports not only curtain attachment
by means of springs but also mechanical anti-lifting devices
(e.g., Zurfluh-Feller, Simu, GAH Alberts and Deprat). These are
detected automatically.
For sun protection applications, please use only the types of tu-
bular drive designed for this purpose.
The PS(+)SMI type of tubular drive described in these instruc-
tions is intended solely for the operation of awnings, screens
and conservatory shades.
It may only be used in networked systems if all the individual
drives are exactly synchronised and reach their limit positions
at the same time.
The "+" type of tubular drive has been designed particularly for
the operation of cassette awnings with a higher requirement for
closing torque (clean closure of the cassette).
For roller shutter applications, please use only the types of tu-
bular drive designed for this purpose.
This type of tubular drive is designed for use in single systems (one drive per barrel).
The tubular drive must not be used in potentially explosive areas.
The connecting cable is not suitable for transporting the drive. Always carry the drive by the housing tube.
Other applications, uses and modifications are not permitted in order to protect the safety of the users and others, since these ac-
tions can impair the system’s safety and carry the risk of personal injury and property damage. The drive manufacturer does not
accept liability for damages or injury arising from such actions.
Always observe the information in these instructions when operating or repairing the system. The drive manufacturer does not ac-
cept liability for damage or injury resulting from improper usage.
Attention
Only use anti-lifting devices if the roller shutter laths are sufficiently strong. The closed
curtain must not project beyond the guide tracks or else there is a risk of the joint between
the top two laths being subjected to excessive strain and getting damaged.
6
Summary of Contents for L120/11C PS(+)SMI
Page 23: ...Declaration of conformity 23...
Page 24: ......
