7
BA_BM_AM-400-500-1200_EN_46-21.docx
3.5
Accident Prevention
To avoid accidents, the following rules must be observed for operation:
Prevent unauthorized persons from gaining access to the work and assembly bench.
Keep unauthorized persons away from the danger areas.
Repeatedly inform present other persons about existing residual risks (see section
4.8 "Residual Risks").
Conduct and record regular training & instruction for persons who must be in the area of the work and
assembly bench.
New employees must be trained internally to work on a supporter and this training must be documented.
It is not permitted to enter the supporter platform or to transport resp. lift persons.
3.6
General Safety Regulations
In general, the following safety regulations and obligations apply when handling the work and assembly table:
The supporter may only be operated when it is in perfect working order.
It is prohibited to remove, modify or bypass any protective, safety or monitoring equipment.
It is forbidden to modify or alter the supporter without the written approval of the manufacturer / supplier.
Faults or damage must be reported to the operator immediately, eliminated without delay and repaired if
necessary.
Repair and maintenance work on electric, hydraulic, and pneumatic components (e.g. electric drives, hy-
draulic cylinders, vacuum pumps, etc.) may only be performed by authorized and trained personnel.
Maintenance must be carried out and documented in accordance with the maintenance instructions.
For repairs, only original spare parts from the manufacturer may be used.
Only instructed, trained or qualified persons may work on the work and assembly bench.
For the operation of the work and assembly bench, the respective national safety regulations for
employees as well as the national safety and accident prevention regulations apply.
3.7
Standard Equipment
•
Without table top and shelf (bottom) as standard.
•
Uniform height adjustment even with uneven load distribution or eccentric loading.
•
The AM 500 FH and AM 1200 FH models are steplessly foot-hydraulically height-adjustable (via a foot
pedal mounted on the left side with separate pedal surfaces for up/down).
•
The AM 400 ESA and AM 500 ESA models are infinitely height-adjustable (electrically via spindle motor,
by two synchronous actuator drives with control board and push buttons for up/down).
•
Additional space under the worktop (e.g. for optional shelf and lower tool cabinet).
•
4 swivel castors (Ø 125 mm), 2 with brake
•
CE-compliant version
3.8
Options and Accessories
•
Special accessories and optional components can be found in chapter