com
.
tom
GRAPHIC 4.11
Getting Started V1.1
Copyright © 2014 Beck IPC GmbH
Page 14 of 14
4
Where to get further information
4.1 Getting
Started
All software referred to in this document can be downloaded from the Getting Started website
at http://www.com-tom.de/start
4.2
Updates, tools, documentation
Regularly check out the com.beck website at http://www.com-tom.de for
Firmware
updates
Useful
tools
Further
documentation
4.3 Support
If you need support please…
1. Check our support website at http://www.beck-ipc.com/support.
2. Visit our forum at http://forum.beck-ipc.com . Here you will find a lot of answers to customer
problems and you can also add your own ideas and questions.
3. Contact our support at [email protected]. Of course you may also contact us by
phone. But please use email if possible. This not only reduces the time you spend on the
phone, it also allows us to easily manage the questions and identify problem areas.
Copyright © 2000-2014 BECK IPC GmbH All rights reserved
No part of this document may be copied or reproduced in any
form or by any means without the prior written consent of
BECK IPC GmbH. The information in this document is subject
to change without notice. Devices sold by BECK IPC GmbH
are covered by warranty and patent indemnification
provisions appearing in BECK IPC GmbH Terms and
Conditions of Sale only.
BECK IPC GmbH MAKES NO WARRANTY, EXPRESS,
STATUTORY, IMPLIED OR BY DESCRIPTION,
REGARDING THE INFORMATION SET FORTH HEREIN OR
REGARDING THE FREEDOM OF THE DESCRIBED
DEVICES FROM INTELLECTUAL PROPERTY
INFRINGEMENT. BECK IPC GmbH MAKES NO
WARRANTY OF MERCHANTABILITY OR FITNESS FOR
ANY PURPOSE.
BECK IPC GmbH shall not be responsible for any errors that
may appear in this document. BECK IPC GmbH makes no
commitment to update or keep current the information
contained in this document.
Life critical applications - BECK products are not authorized
for use as critical components in life support devices or
systems unless a specific written agreement pertaining to
such intended use is executed between the customer and
BECK prior to use. Life support devices or systems are those
which are intended for surgical implantation into the body, or
which sustain life, and whose failure to perform, when
properly used in accordance with instructions for use provided
in the labeling, can be reasonably expected to result in
significant injury to the user. BECK IPC GmbH customers
using or selling these products for use in such applications do
so at their own risk and agree to fully indemnify BECK IPC
GmbH for any damages resulting from such application.
Right to make changes - Beck IPC GmbH reserves the right
to make changes without notice in the products, including
software, described or contained herein in order to improve
design and/or performance. Beck IPC GmbH assumes no
responsibility or liability for the use of any of these products.
