16. Restore power to the drive. The new DCM-3
will need to be calibrated. Please refer to the
calibration section of Beck instruction manual
80-0042-01 for proper calibration instructions.
17. Reinstall the terminal enclosure cover and tighten
the (6) 5/16-18 hex head captive scriews to 10
lb-ft (14 N•m) torque.
18. Return the drive to service.
Figure 1
4/16
Table 1: DCM-3 Replacement Kit
Part Number
Description
22-5014-59
DCM-3 Board
22-5014-29
DCM-3 Board (FF)
22-5014-49
DCM-3 Board (Profibus)
20-0660-76
Terminal Enclosure Gasket
11 TERRY DRIVE NEWTOWN, PENNSYLVANIA 18940 USA
PHONE: 215-968-4600 FAX: 215-860-6383 E-MAIL: [email protected]
www.haroldbeck.com
HAROLD BECK & SONS, INC.
R
(6) 5/16-18 x 1.75 Hex Head
Captive Screws
Enclosure Cover
Digital Control
Module (DCM-3)
Terminal Enclosure