2. Wrong DMX address in the unit , set the proper address.
D:No response to the sound
1. Make Sure the unit does not receive DMX signal
2.Check microphone to see if it is good by tapping the microphone
E:One of the channels is not working well
1. The stepper motor might be damaged or the cable connected to the PCB is broken
2. The motor’s drive IC on the PCB might be out of condition
6.Technical Specification
1.DMX channels:10CH
2. Smooth Electronic dimming
3.Electronic Strobe with pulse and random effects
7.MENU STRUCTURE
channel mode
Choose master mode, slave mode1and slave mode2
DMX ADDRESS
Channel mode
10CH
001-512