Email: [email protected]
may cause damage or interference to DMX interface circuit
C:Unit does not respond to the easy controller:
1. You May have a break in the DMX cable , check the LED for the response of
master/slave mode signal
2. Wrong DMX address in the unit , set the proper address.
D:No response to the sound
1. Make Sure the unit does not receive DMX signal
2.Check microphone to see if it is good by tapping the microphone
E:One of the channels is not working well
1. The stepper motor might be damaged or the cable connected to the PCB is broken
2. The motor’s drive IC on the PCB might be out of condition
6.Technical Specification
1.Zooming function, Fast and powerful LED moving head
2.DMX channels:14 CH
3. Pan/Tile: 630degree/ 245 degree , speed adjustable
4. Smooth Electronic dimming
5.Electronic Strobe with pulse and random effects
CHANNELS TABLE:
14 CHENNELS
channel
Value
Fucntion control
CH1
000-255
Dimmer open
