Configuring Your Router
Status
– ARP Table
44
BEC 8920AC User Manual
ARP Table
This section displays the router’s ARP (Address Resolution Protocol) Table, which shows the mapping
of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a quick way of determining
the MAC address of the network interface of your PCs to
use with the router’s
Security
–
MAC
Filter
ing
function. Here IPv6 Neighbor Table, listed with IPv6 address-MAC mapping, is supported.
ARP Table
IP Address:
Shows the IP Address of the device that the MAC address maps to.
Flag:
Shows the current status of the ARP entries.
Complete: the route resolving is processing well.
M (Marked as permanent entry): the route is permanent.
P (publish entry): publish this route item.
MAC Address:
Shows the MAC address that is corresponded to the IP address of the device it is
mapped to.
Device:
here refers to the physical interface, it is a concept to identify Clients from LAN or WAN.
Example, the Clients in LAN displays as eth4 (client is connected to Ethernet port 4).
Neighbor Cache Table
IPv6 address:
Shows the IPv6 Address of the device that the MAC address maps to.
MAC Address:
Shows the MAC address that is corresponded to the IPv6 address of the device it is
mapped to.
Device:
here refers to the physical interface, it is a concept to identify Clients from LAN or WAN.
Example, the Clients in LAN displays as eth4 (client is connected to Ethernet port 4).
