62
DHCP Server Mode: DHCP Server
To configure the router’s DHCP Server, check
DHCP Server
. You can then configure
parameters of the DHCP Server including the IP pool (starting IP address and ending IP
address to be allocated to PCs on your network), lease time for each assigned IP address
(the period of time the IP address assigned will be valid), DNS IP address and the gateway
IP address. These details are sent to the DHCP client (i.e. your PC) when it requests an IP
address from the DHCP server. Click
Apply
to enable this function. If you check “
Use
Router as a DNS Server
”, the ADSL Router performs the domain name lookup, finds the IP
address from the outside network automatically and forwards it back to the requesting PC in
the LAN (your Local Area Network).
DHCP Server Mode: DHCP Relay
If you check
DHCP Relay
and then you must enter the IP address of the DHCP server which
assigns an IP address back to the DHCP client in the LAN. Use this function only if advised
to do so by your network administrator or ISP. Click
Apply
to enable this function.
Summary of Contents for 7300N
