bebob factory GmbH – Höglwörtherstr. 350 – D-81379 München – Tel.: +49 89 27818282
www.bebob.de
August 2017
Powerbase
Plug off the AC Cord from the charger
Place one or two full batteries on the charger
Battery Power will be available over the XLR 4 DC Output.
Maximum Load depends on the batteries
Safety instructions
Only for professional use! Keep Charger out of reach of children and personnel that has
not been instructed in the use!
Use only with recommended batteries.
Keep the charger dry and do not immerse in water.
Do not cover the charger under use
A standard three-pin AC plug must be used and earth pole must be connected to the earth line.
Do not keep in contact with any part of the body while the charger is in working status.
Do not use or store the charger in unstable, dusty or damp environments.
Remove the battery from the charger after the charging process is complete.
Do not attempt to open or repair the charger. Contact your dealer for help if it becomes
defective.
Handle with care! Do not throw! Do not drop!
Warranty
The AS2-RL is covered by a 2 years unconditional warranty on all parts.
For warranty issues or if you have any additional questions, please contact the appropriate
bebob distributor listed at
www.bebob.de
.
Specifications
Model
AS2-RL
Mount
Gold Mount
Channel
2 simultaneous
Charging current
16,8V 2.5A
DC Output
15.0V 5.0A
DC Port
XLR4 1 minus 4 plus
AC In
90-264V/47-63Hz
Weight
1,0 Kg
Dimensions (WXHXD)
110 x 231x 141mm
Batteries
bebob
Charging time (bebob VS2/VS4)
depends on the battery capacity
Operating Temp. Range
- 10°C ~ + 35°C
