Page 3
4
Tube fittings
B
A
The backrest frame and legs attach using
the system shown left.
The silver button A is squeezed and the
tube end inserted into the outer tube until
the silver button appears through the
corresponding hole, A.
5
Fitting the seat
Fit the backrest tube to the seat frame as
described above.
Open the seat frame.
Slide the pocket of the seat back over the
curved back frame.
Fasten the press stud A at each side of
the seat.
Secure the seat sides by wrapping them
around the frame and fastening press
studs B at each side of the seat.
A
B
