Install Instruction
(Assembled by adult)
A.
Wheels and Preventers Assembly
(1)
Insert two swivel front wheels, two rear linearity wheels and six
preventers into the corresponding holes under the base plate
respectively. Please make sure that they are pressed to the
bottom to avoid from falling-off. (Figure 1~3)
1 2 3
B.
Seat Assembly
(1)
Insert the plastic backrest plate into the seat fabric and insert
the
central pin into the loop of seat fabric. (Figure4)
(2) Lift the upper tray of walker to the highest position.
3.
Insert the pins of the assembled seat fabric (fabric pattern may
vary) into the holes at the back part of the tray, and use two
plastic nuts to fix the seat from the underneath. (Figure 5)
4 5 6
(4
) Insert the three buttons into holes at the
front part of the tray and press them down to
fix. (Figure6)
(5) Insert the two buttons into holes at the
both sides of the tray and push them
backward to fix. (Figure7)
7
