Bebe style BCS222BLACK, Instructions Manual

Page: 2 / 17

2
WARNINGS
THESE INSTRUCTIONS ARE VERY IMPORTANT. PLEASE
READ THROUGH CAREFULLY, AND RETAIN FOR
FUTURE REFERENCE.
PLEASE READ THOROUGHLY BEFORE COMMENCING
INSTALLATION, AS AN INCORRECT INSTALLATION
COULD BE DANGEROUS.
DO NOT USE THIS CAR SEAT IN PASSENGER SEATS
EQUIPPED WITH AIRBAGS.
This child seat can be used with the harness for children of 9 – 18 kgs (approx.
9 months to 4 years) (GROUP 1).
This seat can be used for without the harness for children weighing 15 – 36 kgs
(GROUP II/III).
This seat can only be installed forward facing using a three point lap and
diagonal seat belt. (These instructions should be retained on the child’s car seat
for its life period-in the mesh side pocket, and take good care of it for future
reference).
Do not use this child seat at home. It has not been designed for home use and
should only be used in your vehicle.
The safest seating position for this child seat is on the rear seat of a vehicle.
Never use the child seat without fastening the child’s harness correctly, and
never attempt to use it without fastening into the vehicle.
Do not add to, or modify the seat in any way.
Do not leave your child unattended in the seat at any time.
Car interiors can become very hot when in direct sunlight, it is therefore
recommended to cover the car seat when not in use. This prevents components,
particularly those attached to the child seat becoming hot and burning the child.
In the event of an emergency it is important that the child can be released
quickly. This means that the buckle is not fully tamper proof so your child must
be taught never to play with the buckle.