Bebe Care LETTO 095590 Installation Download Page 2

             

IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY

LETTO

3 DRAWER CHEST

MODEL # 095590

HOW TO CARE FOR YOUR BEBE CARE FURNITURE

Maintenance

Always check parts regularly for tightness of screws, nuts and other fasteners – tighten or replace if required. To maintain 

the safety of your 3 Drawer Chest, seek prompt repairs for bent, torn, worn or broken parts. Use only those parts and 

accessories approved by CNP Brands. 

Distributed in Australia by CNP Brands 

 

20 Calarco Drive, 

Derrimut, VIC, 3030

Customer Service 1300 667 137 

 

 

W: www.cnpbrands.com.au  

E: [email protected]  

F: www.facebook.com/CNPBrands

I: @cnp_baby

Distributed in New Zealand by Wainhouse Distribution 

2-6 Argyle St, Morningside,  

PO Box 41-014,  

St Lukes, Auckland, New Zealand

Customer Service: 0800 567 5000  

 

E: [email protected]

A minimum of two straps are used for each furniture piece using two screws per bracket. Brackets must be fixed to wall studs.

ANTI-TIP FURNITURE STRAP INSTALLATION

1

2

Locate and mark wall studs behind 

furniture and corresponding position 

on the furniture surface.
Position wall brackets (screw holes 

facing down) on the wall stud about 

150 mm below furniture top then 

mark and drill pilot holes into wall 

surface.
Screw wall brackets into wall studs 

using 32 mm wall mounting plugs 

and 25 mm screws.

3 pilot holes on each end of the 

product are already pre-drilled.
Screw brackets into solid timber 

area of furniture using minimum of 

two 19 mm screws.
Slide furniture back into position and 
pull the wall bracket straps until tight.

1a.

1b.

1c.

2a.

2b.

2c.

IMPORTANT CONFIGURATION NOTE:

Before using the Letto 3 Drawer Chest with Letto Change Top, make sure to always attach it to the coordinating product using the attachments provided 

in the box. Always align the back of both items, with the screws facing the wall and attach anti-tip furniture strap for added safety. 
When using with the Letto Modular Bookcase, make sure to remove the leg bracket from the bookcase before placing it on top of the Letto 3 Drawer 

Chest. Always align the back of both items when in configuration and always attach anti-tip furniture strap for added safety.

For more information regarding our full range of coordinating Letto Cots and Change Tables, please visit the CNP Brands website at 

www.cnpbrands.com.au

 and click the bebe care brand link, or contact our Sales Department on

 1300 667 137

 to make your enquiry. 

ADDITIONAL FURNITURE RANGE

Letto Modular Bookcase

# 095593

Letto Toy Chest

# 095594

Letto Change Top

# 095592

Letto Open Chest

# 095591

Letto 3 Drawer Chest

# 095590

Reviews: